Vacuum System - endolite EchelonVAC Instrucciones De Uso

Assembly Instructions:
Vacuum System Assembly
1 Push the In-line Filter on to a short piece of vacuum tubing and connect it to the Vac Barb
90deg on the socket. The barb outlet should be positioned pointing downwards by releasing
the centre screw and rotating the body of the unit. Tighten the screw when the barb outlet is in
the required position.
2 Attach a length of vacuum tubing to the In-line Filter and wrap it around the pylon. Connect
the other end of the tube to the Check Valve ensuring that the flow arrow points towards the
ankle. For maximum vacuum, position the Check Valve close to the inlet on the EchelonVAC.
Connect a short length of vacuum tubing from the Check Valve to the inlet on the ankle to
complete the vacuum system.
Auto-Expulsion
Check Valve
All manuals and user guides at all-guides.com

Vacuum System

Valve
16
Vac Barb 90deg
In-line Filter
Inlet
938367/1-0816