Operation Instruction - Stick/Tig Mode - Husky MP180 Guía De Uso Y Cuidado

Operation Instruction – STICK/TIG Mode
1
Preparing for Welding
□
Designate a work area that is clean and well lit. Keep children
and pets out of the work area.
□
Read the user manual and safety guidelines before operating
the welder.
□
Ensure you understand the basic specification of your welder.
□
Wear PPEs to protect your eyes and skins from hot welding
sparks and intensive arc rays. Ensure same protections are
provided to any bystanders nearby.
□
Ensure all the combustible, flammable, hazardous substances
are removed from the work area. Make sure a fire
extinguisher within reach is available.
□
Inspect your welder before each use and do not operate a
welder with damaged cables and components. Replace all the
damaged parts before use. Have a qualified technician help
you if needed.
□
Shielding gas (inert gas only) is required for TIG mode
welding. Check the "Connecting the Gas Cylinder (TIG)"
instruction for more details.
2
Connecting the Gas Cylinder (TIG)
□
Always make sure your gas cylinder is fully closed (turned
counterclockwise) when not welding or moving the cylinder.
□
Before welding, make sure your gas cylinder is securely fixed
to a wall or a steady workbench. Hitting by falling gas
cylinder can cause severe injury. Dropping gas cylinder can
cause hazard.
□
Turn the regulator adjustment knob counterclockwise to
ensure the gas regulator's valve is fully closed.
□
Connect one end of the gas regulator with the gas cylinder.
□
Attach the other end of the gas regulator with a TIG torch gas
line.
□
Make sure all connectors are tightened or sealed.
□
Open the gas cylinder valve and adjust the gas flow as you
need on the regulator; a recommended range is 8.5 -17 cu
ft/h.
□
For TIG mode, use inert gas (argon) only.
WARNING: Welding processes generate high-
temperature arc, welding sparks, hot slag and hot
spatters. Welding arc generates extremely intense
ultraviolet and infrared light. Failure to wear
protective equipment during welding can severely
damage your eyes and burn your skin.
WARNING: Failure to protect combustible
materials against welding sparks, hot slag and hot
spatters can cause fire and even explosion. Fire
and explosion can cause death, injury and
property damage.
WARNING: Gas cylinders are highly pressurized.
Improper use of gas cylinder can cause severe
accident. Do not drop the cylinder, knock it over,
expose it to excessive heat, flames or sparks.
Securely fix it to a steady wall or workbench while
using it.
10