Black and Decker BPT05WTBA Manual De Instrucciones página 20

SET UP & USE
TIMER BUTTON
• The timer can be used to delay the appliance start-up or shutdown.
PROGRAMMING START-UP
• With the appliance ON select the settings that you would like to program
at start-up. Example: COOL Mode, temperature, fan speed. Turn OFF the air
conditioner.
• Press the button twice, the LED screen will display hours, the
symbol will flash
• Press the or
switch on using the buttons (from 30 minutes to 24 hours).
• During the first ten hours you can select half hour intervals. For times longer
than ten hours, one hour intervals can be selected.
• Press the button again to activate the selected time. The
will be displayed on the LED screen
on the LED screen
• To cancel the programmed start-up, press the
button. The
PROGRAMMING SHUT DOWN
• With the appliance ON Press the
hours, the
• Press the or
down using the buttons (from 30 minutes to 24 hours).
• Press the button again to activate the selected time. The
will be displayed on screen
LED screen.
• To cancel the programmed shut-down, press the
button. The
SLEEP BUTTON
• The SLEEP function maintains the room at optimum temperature without
excessive fluctuations with silent operation. Fan speed is always at Low,
while room temperature adjusts gradually to ensure the most comfortable
environment operation of the appliance.
Page 20
.
button to set the time when you want the appliance to
symbol will not be illuminated on the LED screen.
symbol and symbol will flash
button to set the time when you want the appliance to shut
symbol will not be illuminated on the LED screen.
. Remaining time will be displayed
button again or the
button twice, the LED screen will display
. Remaining time will be displayed on the
symbol and
symbol and
.
symbol and
button again or the