Service And Repair; Threading Oil; Optional Equipment; Disposal - RIDGID 760 FXP Manual De Instrucciones

760 FXP Power Drive

Service And Repair

WARNING
Improper service or repair can make the 760 FXP
Power Drive unsafe to operate.
The "Maintenance Instructions" will take care of most
of the service needs of this machine. Any problems not
addressed by this section should only be handled by a
RIDGID Authorized Independent Service Center. Use only
RIDGID service parts.
For information on your nearest RIDGID Authorized Inde-
pendent Service Center or any service or repair questions
see Contact Information section in this manual.

Threading Oil

For information concerning RIDGID
use and handling, refer to the labels on the container and
Safety Data Sheet (SDS). SDS is available at RIDGID.
com or by contacting Ridge Tool Technical Service
Department at (800) 519-3456 in U.S. and Canada or
rtctechservices@emerson.com.

Optional Equipment

WARNING
To reduce the risk of serious injury, only use acces-
sories specifically designed and recommended for
use with the RIDGID 760 FXP Power Drive, such as
those listed.
Model Catalog
No. No. Description
42600 770 Adapter for 00-R (1/8" – 1") and 00-RB (1/4" – 1")
42605 771 Adapter for 0-R (1/8" – 1")
760 FXP
42610 772 Adapter for 11-R (1/8" – 11/4")
12-R
42615 773 Adapter for 111-R (1/8" – 11/4")
42620 774 Square Drive Adapter -15/16"
760 FXP
39187 Ratcheting Ring
11-R
45928 692 Support Arm
74463 Carrying Case
760 FXP
11-R
10883 418 Oiler with 1 Gallon Nu-Clear Oil
and
22088 Extreme Performance Aerosol Thread Cutting Oil
760 FXP
12-R
16703 425 1/8" – 21/2" TRISTAND Vise
36273 460-6 1/8" – 6" TRISTAND Vise
Battery and Adapter Packs
Catalog
No. Description
70788 RB-FXP40 4.0Ah Li-Ion Battery
70793 RB-FXP80 8.0Ah Li-Ion Battery
16
Thread Cutting Oil
®

Disposal

Parts of these tools contain valuable materials and can be
recycled. There are companies that specialize in recycling
that may be found locally. Dispose of the components in
compliance with all applicable regulations. Contact your
local waste management authority for more information.
For EC Countries: Do not dispose of electri-
cal equipment with household waste!
According to the European Guideline 2012/
19/EU for Waste Electrical and Electronic
Equipment and its implementation into na-
tional legislation, electrical equipment that
is no longer usable must be collected separately and
disposed of in an environmentally correct manner.
Electromagnetic Compatibility
(EMC)
The term electromagnetic compatibility is taken to mean
the capability of the product to function smoothly in an
environment where electromagnetic radiation and elec-
trostatic discharges are present and without causing
electromagnet interference to other equipment.
NOTICE These tools conform to all applicable EMC
standards. However, the possibility of them causing in-
terference in other devices cannot be precluded. All EMC
related standards that have been tested are called out in
the tool's technical document.
999-995-242.10_REV A