Publicidad
Idiomas disponibles
Idiomas disponibles
TOOL IDENTIFICATION PLATE
POSITION AND MEANING OF INFORMATION
1. Type of tool.
2. Nominal working voltage in Volts (V).
3. Working frequency in Hertz (Hz).
4. Absorbed current in Amperes (A). Ensure that the power supply to
which the tool is connected can easily tolerate the indicated cur-
rent as a minimum.
5. Absorbed power expressed in Watts (W).
6. Tool code or serial number.
7. Technical data of the tool.
8. Maximum rpm
9. The double square indicates that the tool is doubly insulated and
therefore does not require earthing through the power supply ca-
ble.
10.
Read all these instructions before operating this product and
save these instructions.
11.
Personal safety devices.
12.
At the end of its useful life, the product, pursuant to European
Directive 2002/96/CE and its implementation in national law, must
not be released into the environment or thrown away as domestic
waste, but must be disposed of at authorised recycling centres
(contact the relevant local authorities for a list of places where the
product may be disposed of according to the law).Disposing of
the product correctly contributes to protecting human health and
safeguarding the environment. Any illegitimate disposal of the
product will be punishable by law.
CONFORMITY DECLARATION
Year of affixing to the
mark: 96
We declare on our responsibility that the represented hand-held
electric motor operated tool, in protection class II, is in conformity
with the Essential Requirements of Safety of the following Directives:
73/23/CEE
Low Tension + 93/68/CEE
89/336/CEE
Electromagnetic Compatibility + 91/263/CEE +
92/31/CEE + 93/68/CEE
The tests have been carried out in accordance with the European Har-
monised Regulations in force
Low Tension:
EN 60745-1
Safety of hand-held electric motor operated tools
EN 60745-2-3
Particular requirements for grinders, polishers and
disc sanders
EN ISO 3744 + UNI EN ISO 11203
propagated noise
UNI EN 28662
+ UNI EN ISO 5349
the handle
Electromagnetic compatibility:
EN 55014 -1 + EN 55014-2; EN 61000-3-2 + EN61000-3-3
Electromagnetic fields:
EN 50366
Tests and limits relative to
Measuring of the vibrations on
S.p.A
IL PRESIDENTE
G. Valentini
11
Publicidad
