ZACO M1S Manual Del Usuario página 31

English
Troubleshooting
Place robot on horizontal ground
and start it.
Put the robot on the ground to start.
Remove any obstacle around robot
and try again.
Make sure that the dustbin is mounted
in place.
Make sure the clean water tank has
been installed.
Please make sure the dirty water tank
has been installed.
Please make sure the sewage mesh
has been installed.
The clean water tank is empty.
Please add clean water in time.
The dirty water tank is full.
Please clean it up in time.
The dirty water tank is full.
Please clean it up in time.
Please move the robot back to
the cleaning station.
Low battery level. Please charge robot.
Find more information at www.zaco.eu
It is detected that robot is not on a flat
surface. Place the robot on a flat surfa-
ce and start it, or perform levelling in APP
and then restart robot.
The wheels are suspended. Please move
to a new position to start.
1. Robot may be jammed or trapped.
Remove any barrier around it.
2. Replace the dustbin and filter screen,
and make sure that both are installed in
place.
Check the dustbin and filter screen, and
make sure that both are installed
in place.
Please reinstall the clean water tank
and make sure that it is in place.
Please reinstall the dirty water tank
and make sure that it is in place.
Please clean the dirt water sieve and
make sure that the sieve is in place.
Please check and refill the clean
water tank.
Please empty out the water in the
dirty water tank and clean it up regularly.
Please check and clean the tank.
The robot cannot locate the position
of the cleaning station. Please put the
robot back to the cleaning station for
charging.
The robot fails to locate charging sta-
tion. Please manually place robot back to
cleaning station.
31