Install The Rear Fender; Install The Pedals - HITWAY BK7 Guía De Instalación Rápida

4. Install the Rear Fender

1. Use the No. 4 Allen wrench in the 16-in-1 tool to
remove the fixing screws of the mud plate support rods
pre-installed on the left and right sides of the frame.

5. Install the Pedals

1
The "R" marked on the pedal shaft means the right
pedal, and the "L" mark means the left pedal.
2. Fix the rear fender support rods to the
corresponding screw holes of the frame
and use the No. 4 Allen key in the 16-in-1
tool to tighten the screws.
-8-
2