HITWAY BK7 Guía De Instalación Rápida página 9

4. Take out the
10mm sleeve and
combine the
16-in-1 tool as
shown in the
picture.
6
4
6. Use the No.
4 Allen key in
the 16-in-1 tool
to remove the
fender support
screws
pre-installed on
the left and
right sides of
the front fork.
5
7
-5-
5. Tighten the nut
with the combined
tool.
7. Fix the front
fender support
rods to the
corresponding
screw holes of
the front fork
and use the No.
4 Allen key in
the 16-in-1 tool
to tighten the
screw.