Ecoflow App; Getting Started; System Overview - EcoFlow POWER HUB Manual Del Usuario

EcoFlow App

Privacy Policy
By using EcoFlow Products, Applications and Services, you consent to the EcoFlow Term
of Use and Privacy Policy, which you can access via the "About" section of the "User" page
on the EcoFlow App or on the official EcoFlow website at https://www.ecoflow.com/policy/
terms-of-use and https://www.ecoflow.com/policy/privacy-policy
1. The product Bluetooth can only be connected with one account, if you want
to use another account, please reset Bluetooth via the EcoFlow App or long
pressing the DC button on the product for 3 seconds.
2. This product ONLY SUPPORTS 2.4GHz WiFi.

Getting Started

System Overview

1. If the product is installed in an enclosed space, proper ventilation is a MUST
to prevent this product from overheating.
2. For safety reasons, it is recommended to install a Ground Fault Circuit
Interrupter (GFCI), also known as Residual Current Device (RCD) in the
AC input and AC output of the Power Hub. Please refer to local regulations
regarding grounding of autonomous power systems.
3. Before connecting this product to EcoFlow LFP Battery, ensure that there is
no charging input connected to Power Hub and LFP Battery is powered off.
4. It is not recommended to use one Power Hub with both EFM100-BPB and
EFM100-BP at the same time.
5. It is not recommended to connect or disconnect LFP battery when the
system is on.
Control, monitor and customize your Power Kits from afar with the
EcoFlow App. Download at:
https://download.ecoflow.com/app
EN
3