Cd/Mp3 Operation; Usb Operation; Bt Operation - auna V-14.2 Manual De Instrucciones

EN
30

CD/MP3 OPERATION

Switch to CD mode
Press PUSH to open the disc cover, then gently place the CD/MP3 disc with
the printed side uppermost on the disc compartment and then close the
disc cover. Keep pressing the MODE button on the player or on the remote
control to select CD mode.
Select tracks
Pressing ⏮/⏭ will skip to the previous/next track. Track number will be
showed on the display.
Pause playing
⏯
Press button on the player or on the remote control to pause the player.
Press it again to resume playing.
Stop playing
Press ⏹ button to stop the player. Press to play from the start.

USB OPERATION

On the left side of the main unit, you will see the USB interface.
This player plays MP3 that are stored on USB device
Connect the USB drive to the USB port on this player.
Press MODE button to select USB mode. A contents menu is displayed and
play starts.
Select a file to play if play does not start automatically.
Notes:
The maximum current for the USB port should be 500 mA. The product will
automatically enter into protecting status and the USB device would stop
working once the USB consumption exceeds 500 mA.

BT OPERATION

1. Press the MODE button to select Bluetooth mode.
2. Use your BT device to scan and pair with this player. The pair name is
"V-14.2".
3. Play your desired music from your BT device.