Acetech iTracer Unit Manual De Instrucciones página 30

Function Setting
Speed Unit
Metric or imperial units
Set Value:m/s or ft/s
Default:m/s
Energy Unit
J : Joule
J/cm² :Energy per unit
area
Set Value:
Joule or J/cm²
Default :Joule
Caliber
Diameter of BB,
Unit: mm
Set Value
:
4.0~8.0 mm
Default 6 .0 mm
:
1.Press data knob
enter the interface of
" Speed Unit " function.
(Figure-11)
2.Rotate data knob
clockwise/counterclockwise:
To choose the speed unit
(m/s or ft/s).
(Figure-12)
3.Press data knob
Screen flickers and then the setting is completed.
(
1.Press data knob
enter the interface of
" Energy Unit " function.
(Figure-13)
2.Rotate data knob
clockwise/counterclockwise:
To choose the energy unit
(Joule or J/cm2).
3.Press data knob
Screen flickers and then the setting is completed.
(
1.Press data knob
enter the interface of
" Caliber " function.
(Figure-15)
2.Rotate data knob
clockwise/counterclockwise:
To adjust the caliber of BB.
(Figure-14)
3.Press data knob
Screen flickers and then the setting is completed.
(
Introduction
to
Speed Unit
(
(
:Confirm.
to
Energy Unit
(
(
(Figure-14)
:Confirm.
to
Caliber
(
6.0mm
(
:Confirm.
Figure-11
)
m/s
Figure-12
)
)
Figure-13
)
Joule
Figure-14
)
)
Figure-15
)
Figure-16
)
)
29
EN
EN