Function Setting
BB Weight
Weight of BB,
Unit: gram
Set Value:0.01~1.0 g
Default:0.2 g
ROF Unit
Round-per-Minute or
Round-per-Ssecond
Set Value:RPM or RPS
Default:RPM
Auto Power OFF
Set time to automatic
power off iTracer CD.
Set Value:
5~80 minutes
Default:30 minutes
1.Press data knob
enter the interface of
"BB Weight " function.
(Figure-17)
2.Rotate data knob
clockwise/counterclockwise:
To adjust the Weight of BB.
(Figure-18)
3.Press data knob
Screen flickers and then the setting is completed.
(
1.Press data knob
enter the interface of
"ROF Unit " function.
(Figure-19)
2.Rotate data knob
clockwise/counterclockwise:
To choose ROF Unit
RPS/RPM.
(Figure-20)
3.Press data knob
Screen flickers and then the setting is completed.
(
iTracer CD will automatically shut down if it is idle longer
than the time you set.
When shutting down, iTracer CD will save the current UP
and DN values . The next time when you turn on the
iTracer CD, it will reload the values of UP and DN.
1.Press data knob
enter the interface of
"Auto Power OFF "
function.
(Fgure-21)
2.Rotate data knob
clockwise/counterclockwise:
To set time to automatic
power off iTracer CD.
3.Press data knob
Screen flickers and then the setting is completed.
(
Introduction
to
BB Weight
Figure-17
(
0.30g
Figure-18
(
:Confirm.
to
ROF Unit
Figure-19
(
RPM
Figure-20
(
:Confirm.
to
Auto Power OFF
Figure-21
(
30 mins
Figure-22
(
(Figure-22)
:Confirm.
)
)
EN
)
)
)
)
)
)
)
30
EN