Publicidad
Idiomas disponibles
Idiomas disponibles
3. INSTALLATION
3.1 LOCATING THE SCALES
•
The scales no must be in a site what can reduce your precision.
•
Avoid the temperatures extreme. No the put a exhibition direct of ground o near of conditioners.
•
Avoid tables unstable. The mesa o soil must be rigid y no vibrate.
•
Avoid sources of power unstable. The use near of equipment with great consume of electricity tales as equipment of welding o engines large.
•
Do not place near vibrating machinery.
•
Avoid high humidity which can cause condensation. Avoid direct contact with water. No spray o dipping the balance in water.
•
Avoid movement of air (fans o open doors. No place near of windows open conditioners.
•
Keep the balance clean.
3.2 ASSEMBLING THE SCALES
3.2.1 ASSEMBLING THE LOCAL SCALE
• Connect the adapter cable to the right-side connector of the scale base. Plug in the power adapter. The switch of power is in the face right of the
base of the balance..
• The balance shows the number y model in the window of the screen "weight" (bcd 15, where15 denotes the capacity maximum of the balance in
kg) y the software current in the window of screen "unit weight".
• Then follow a self-test. at the end of the auto-test, it will show "0" in all three screens, if the zero condition has been achieved.
3.2.2 ASSEMBLING THE REMOTE SCALE
• The series BCD with any type of cell of load weighs a thorough of port of balance remote located in the side left of the housing of the balance. make sure
of what has the platform correct for the balance already what each a is a by calibration.
• Place the platform of the balance remote in the site where be used. Levels the balance adjust the four feet. when agree with the level adjusted of way what
the bubble is place in the center same of the balance press the buttom
22
2.3 COMMON SPECIFICATIONS
Interface
Time stabilization
Operating temperature
Supplement power
Calibration
Screen
Housing
Plate dimension
Total dmensions
Weight NET
Applications
Function
Other Features y Specifications
Interface RS-232
2 Seconds
0°C - 40°C (32°F - 104°F)
12 vdc 500 but for supplement power external
External automatic
3 X 6 digits LCD display digital
ABS plastic, steel plate stainless
225 x 300mm / 8.9 x 11.8"
320 x 340 x 125mm / 12.6 x 13.4 x 4.9"
3.8kg
Counting scale
Weighing, parts counting, accumulation memory, preset counting with
alarm of up to 100 PLUs with description, unit weight and tare.
High precision for counting parts, internal rechargeable battery (~70
hours of operation)
• The series BCD includes a dish of steel stainless packaged separate.
• Place the platform in the holes of the housing superior.
• No press with excessive force already what it could damage the cell of load of interior
• Levels the balance adjusts the four feet. The balance must adjust of way that the bubble
of level is in the center of circle y the balance seen held by the four feet.
and check the performance of heavy.
OPERATION MANUAL BCD
EN
EN
Publicidad
