This method is used only when is allowed the information alfa numerical. is used for the field of description and for number of user and number in the

parameters section

6.4.3 REMEMBER PLU MANUALLY

•

For remember the values liked the user must select first the balance local or remote already what the value tare stored be specific of the balance selected.

•

Then press the button

•

The screen shows the results of the memory during 1 second v after will a although with the information in your site.

For example:

PRESS

After of 1 second will a although normally with the tare and

the unit weight Inputs previously

•

If is hold the button

•

In this example the screen

PLU 27 M 4 Tuerca

•

If the value tare is out of range allowed by the balance selected (for example if is select the balance local while what the value tare it applicable a the

remote it exceeds the capacity of the balance local) the "weight" show weight tare zero.

•

If the value tare stored does not correspond with the increase of the balance selected (for example stored -1.446 for a balance with d = 0.05) then

the weight tare depending on in the resolution of the balance by example in this case -1.45 be used as value tare).

•

If it remembered a number liked what no has no information stored the balance continue working with the tare y the unit of weight without change.

THE PLU CAN BE STORED AND MEMORIZED USING THE RS-232 INTERFACE (SEE SECTION 9.1 AND 9.2 OF HIS USER MANUAL).

M N

J K L M N O P Q R S T U V W X Y Z -

, enter the number liked (00 – 99) and press the

ACCIÓN

after of the input numerical show the description during the while what sea pressed the button.