Before Use - Taurus 944160 Manual De Instrucciones

Downloaded by: pm-capetown on 19-09-2022 12:25 CEST
vision or instruction concerning use of the appliance
by a person responsible for their safety.
2.2.5. This appliance is not a toy. Children should be
supervised to ensure that they do not play with the
appliance.
2.3. Use and care:
2.3.1. Fully unroll the appliance's power cable before
each use.
2.3.2. Do not use the appliance if the parts or acces-
sories are not properly fitted.
2.3.3. Do not turn the appliance over while it is in
use or connected to the mains power supply.
2.3.4. Unplug the appliance from the mains power
supply when not in use and before undertaking any
cleaning task.
2.3.5. This appliance should be stored out of reach
of children.
2.3.6. Do not store the appliance if it is still hot.
2.3.7. Never leave the appliance unattended when in
use and keep out of the reach of children.
2.3.8. If for some reason, the appliance were to
catch fire, disconnect the appliance from the mains
power supply and DO NOT USE WATER TO PUT THE
FIRE OUT.
2.4. Service:
2.4.1. Make sure that the appliance is serviced only
by suitably qualified technician, and that only original
spare parts or accessories are used to replace exist-
ing parts/accessories.
2.4.2. If the power cord is damaged, the manufactur-
er or its service agent or a similarly qualified person
must replace it in order to avoid a hazard.
2.4.3. Any misuse or failure to follow the instruc-
tions for use renders the guarantee and the manufac-
turer's liability null and void.
3. Instructions for use

3.1. Before use:

3.1.1. Remove the appliance's protective film (if
applicable).
3.1.2. Before using the product for the first time,
clean in the manner described in the cleaning sec-
tion.
3.2. Assembly:
3.2.1. Assembling the legs
3.2.1.1. Insert the tripod legs (10) into the holes of
the leg holder (9) ensuring the line indent on the pipe
reaches the opening of the leg holder (9) as shown
in Fig. 2.
3.2.1.2. Tighten the screws on the leg holder.
944160_IM.indd 3 944160_IM.indd 3
Fig. 2.
3.2.2. Assemble the fan head.
3.2.2.1. Remove the nuts and screws from the top
of telescopic pipe (6).
3.2.2.2. Place the motor (12) on top of the tele-
scopic pipe and tighten the screws. See directions
below:
Step 1: Remove the thumb screw and axle from the
upper end of the standing pipe (6).
Step 2: Remove the screws from the motor unit
bracket (12).
Step 3: Attach the motor unit to the extension pole
by installing the axle.
Step 4: Replace the screws on both sides of the
motor unit bracket ensure that the screws are placed
on the correct side.
Step 5: Install and tighten the thumb screw to hold
the motor unit in place
2021/06/08 10:54 2021/06/08 10:54