Declaration Of Conformity; Specified Use - FISCHER FGW 90F Manual De Usuario

1

Declaration of conformity

We declare under our sole responsibility: This gas actuated fastening tool, FGW 90F, complies with
all relevant requirements of the directives *1) and standards *2). Technical data at *3) – see page 43.
01.07.2021
Dr. Oliver Geibig
Head of Business Units & Engineering,
Member of the Executive Board
2

Specified use

The gas actuated fastening tool is designed to drive suitable nails into solid wood, laminated timber,
plywood as well as chipboard, fiberboard and veneer materials and other materials suitable for the
direct fastening technique. The gas tool, fuel cell, battery and nails form a technical unit.
Trouble free fastening can only be ensured if only the recommended battery, fuel cell and nails
manufactured by fischer are used. Only use the tool as a hand-held device.
→ only use the fischer battery B 7.2V with this product (*A) – see page 34
→ only use the fischer battery charger BC 7.2V to charge the battery (*B) – see page 34
→ only use the fischer fuel cell with this product (*C) – see page 34
→ only use nails with a shank diameter of 2.8 - 3.3 mm and a length of 50 - 90 mm,
magazined in a 34° angle with this product (*D/*E) – see page 34
The user bears sole responsibility for any damage caused by improper use. Generally accepted
accident prevention regulations and the enclosed safety information must be observed.
EN
27