Wheel For Depth Adjustment; Magazine; Indication Of Battery-Led Status - FISCHER FGW 90F Manual De Usuario

4.2 Wheel for depth adjustment

EN The wheel for depth adjustment can be used to reduce the depth and choose how to set the nails –
flush or fully embedded. In the short setting of the nose piece, the nails are set deep. By using the
wheel to extend the nose piece, the setting depth of the nail will be reduced.

4.3 Magazine

The tool is equipped with a magazine with an angle of 34°.
The nail capacity of the magazine is 60 nails.

4.4 Indication of battery-LED status

After inserting the battery into the tool, the LED lights indicate the battery power and the status of
the tool.
Status
All three LEDs lights green
Two LEDs lights green
One LED light green
One LED is flashing green
One LED light red
All three LED lights flash red
32
Short nose piece =
large setting depth
Meaning
The tool is ready, and the level of capacity is between 100% and 60%
The tool is ready, and the level of capacity is between 60% and 30%
The tool is ready, and the level of capacity is between 30% and 10%
The tool is ready, and the level of capacity is between 10% and 5%
The tool is ready, and the level of capacity is below 5% and should be
recharged soon
The tool has some issue and should not be used anymore,
see troubleshooting (chapter 9) to get the tool working again
Long nose piece =
reduced setting depth