Publicidad
Idiomas disponibles
Idiomas disponibles
12 | English
Ensure that the workplace is well ventilated.
u
The vacuum cleaner should be repaired exclusively by
u
a qualified professional using only genuine spare
parts. This will ensure that the safety of the vacuum
cleaner is maintained.
Before using the equipment for the first time, check
u
that the vacuum hose is in perfect condition. Leave
the vacuum hose fitted to the vacuum cleaner while
doing this so that no dust escapes accidentally. Other-
wise, you may end up inhaling dust particles.
Do not sit on the vacuum cleaner. You can damage the
u
vacuum cleaner this way.
Take care when using the power cable and the vacuum
u
hose. Improper use of these can put other people at risk.
Do not clean the vacuum cleaner by spraying a jet of
u
water directly at it. Water entering the top of the va-
cuum cleaner will increase the risk of electric shock.
Connect the dust extractor to a properly earthed
u
power supply system. The plug socket and extension
cable must have a fully functioning protective conductor.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Do not extract ash. For this, use specialised dust ex-
u
tractors or extraction systems with an appropriate rating.
Symbols
The following symbols may provide you with important in-
formation pertaining to the use of your dust extractor. Please
take note of these symbols and their meaning. Knowing what
these symbols mean will help you to use your extractor more
effectively and more safely.
Symbols and their meaning
Automatic start/stop
Extracting dust that accumulates from
working power tools
The dust extractor switches on automat-
ically and off again with a time delay
Switching Off
Extraction
Extracting dust deposits
Permitted connected load of the connec-
ted power tool (country-specific)
max. 2000W
min. 100W
1 609 92A 7UR | (25.10.2022)
Product Description and
Specifications
Intended Use
The vacuum cleaner is intended for vacuuming dry materials
that are not harmful to health.
The vacuum cleaner is intended only for household and do-
mestic use.
The dust extractor is not approved for continuous operation.
Product Features
The numbering of the product features refers to the repres-
entation of the vacuum cleaner on the graphic pages.
(1) Vacuum hose holder
(2) Mode selector switch
(3) Cable holder
(4) Plug socket for power tool
(5) Carrying handle
(6) Holder for crevice/floor nozzle
(7) Hose adapter
(8) Release button for dust container
(9) Dust container
(10) Vacuum hose
a)
(11) Curved nozzle
(12) Dust extraction adapter
(13) Crevice nozzle
(14) Floor nozzle
(15) Snap fastener
(16) Connection flange
(17) Dust container lid
(18) Dust bag
(19) Dust bag holder
(20) False air intake
(21) Textile filter
(22) Flat-pleated filter
(23) Exhaust air cover
(24) Permanent filter
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Dry extractor
Article number
Rated voltage
Rated power input
Frequency
Container volume (gross)
EasyVac 3
3 603 CD1 0..
V
220–240
W
700
Hz
50/60
l
2.1
Bosch Power Tools
Publicidad
