Publicidad
Preparation
Dust nozzle assembly
• Take the dust nozzle (A) and place it on the inside of the
sawdust ejector (B).
• Rotate the nozzle to the preferred direction to dislodge
the sawdust.
Start up
The circular saw is a multi-purpose tool for cutting soft or hard wood, chipboard, plywood, resopal-coated materials, etc.
CAUTION
This tool is not designed for cutting metal, masonry, concrete or brick materials. Use extreme caution
when cutting wet, pressure treated or knotty wood. Maintain a smooth, flat tool feed without reducing blade speed to
avoid overheating the blade tips.
Start up
• Press the safety catch (A) to release the trigger switch.
• Press the switch (B) to start the disc spinning, the disc will
reach its maximum speed.
• To stop the disc, release the switch.
Cutting depth adjustment
1. Loosen the depth of cut lock lever (C).
2. With the base stationary, raise the housing until the blade protrudes from the base to the desired depth. Use the depth
guide (D) as a reference.
3. Tighten the depth of cut lock lever to prevent the housing from moving during cutting.
4. The depth of cut can be up to 2".
CAUTION
• The cutting depth must be equal to the thickness of the workpiece or protrude from the workpiece by a
maximum of one tooth of the blade to avoid accidents.
A
A
C
B
B
D
Base
ENGLISH
9
Publicidad
