Descargar Imprimir esta página

Bang & Olufsen BeoVision 5 Instrucciones De Servicio página 37

Ocultar thumbs Ver también para BeoVision 5:

Publicidad

Text registers
0
1
English
Polish
German
German
Swedish
Swedish
Italian
Italian
French
French
Portuguese
Serbocroat
Czech/Slovak
Czech/Slovak
Rumanian
WSS setting
Theft protection setting
Text Register setup
R01
R02
5
11
R09
R10
0
0
Selecting "Set" makes it possible to choose from 7 different teletext character set.
2
3
English
English
German
Russian
Swedish
Estonian
Italian
Czech/Slovak
French
German
Portuguese
Lithuanian/Lettish
Turkish
Ukranian
Group delay errors in certain cable aerial systems can disturb the reception of
teletext. This is prevented by connecting a fi lter in series with the CVBS signal
applied to the teletext decoder.
The numbers below the Register numbers R01 - R10 are programme numbers. If
all the numbers are 0, no fi lter has been connected on any programme number.
If you wish to connect a fi lter on a programme number, select a register by
l
n
pressing
/
, then press the desired programme number, and fi nally press GO.
In the example above a fi lter has been connected on programmes 5 and 11. The
fi lter is not engaged until the next time you switch to the programme in question.
WSS setting
WSS
On
Some TV broadcasters transmit a picture format identifi cation, enabling the TV to
switch to the proper format automatically when WSS is On. When WSS is On,
detection is carried out on all picture sources, i.e.
TV tuner, satellite tuner, and video/DVD playback.
Under certain conditions, e.g. a poor signal-to-noise ratio, the detection may fail,
causing faulty format switching. WSS may therefore be set to "Off".
WSS may also be set to "Broadcast only", which means that detection is carried
out only on signals from the TV tuner and the satellite tuner.
Some broadcasters do not send a "WSS Off" signal when a programme is fi nished
and another begins. When the "WSS signal" disappears, the format will return to
default.
- In this menu it is possible to activate (ON) or deactivate (OFF) theft protection. It is
only possible to access this menu if no pin code is set for BeoVision 5.
R03
R04
R05
0
0
0
Set
0
4
English
German
Swedish
Italian
French
Portuguese
Turkish
Greek
Service Mode, English
R06
R07
R08
0
0
0
5
6
English
English
Arabic
Hebrew
French
Arabic
5.7

Publicidad

loading