Safety Information; Product Description - Mach Power HC-SWAP50 Manual Del Usuario

Thank you for purchasing one of our products.
Read and follow this manual carefully before use. The product is intended for domestic use under
normal conditions of use.
Warnings
1. Do not use the device near water. Do not touch the device with wet hands.
2. Do not use water, liquids, detergents or flammable substances to clean the device.
3. Do not cover the air intakes.
4. Do not use if the device is damaged.
5. Do not disassemble, repair or reassemble the device.
6. If you do not use the device for a long time, disconnect the power supply.
7. Do not use the device in environments subject to sudden changes in temperature.
8. In the event that the device emits strange noises or the presence of bad smells or smoke, immedia-
tely remove the power supply and contact the technical service.
9. In case of plug failure, do not use adapters, but contact the technical service.

1. SAFETY INFORMATION

1. Make sure that the plug is properly connected to the electrical outlet and that the voltage complies
with the indications on the label.
2. In case of damage to the wire, do not repair. Contact the technical service.
3. Make sure that the plug is connected correctly and that it is not subjected to under load or overlo-
ad.
4. Place the device at least 20cm away from the wall or objects and have a space of at least 30cm for
the top fan.
5. Use only original filters suitable for this device. Do not use different filters. Do not insert any object
inside the device.
6. Turn off the device before cleaning or repairing.

2. PRODUCT DESCRIPTION

4
1
Front cover
2
Panel
3
Filter
4
Centrifugal impeller group
5
Air quality sensor