Installation Guide; Operation - Mach Power HC-SWAP50 Manual Del Usuario

ENG

3. INSTALLATION GUIDE

First use
1. Read carefully and keep this manual for future reference.
2. Remove all packaging and clean all removable parts with a soft, dry cloth.
3. Place the device in a dry place and on a stable and horizontal surface. Make sure there is at least
20cm clearance from the wall and objects.
4. When using the device you can hear a slight sound ("ZZZ"), don't worry it's normal noise.

4. OPERATION

Plug the device into the power outlet
1. ON / OFF
Power ON: Press the On / Off button on the remote control to turn on the device. Each time the devi-
ce is turned on it will start up at a default speed.
Power OFF: Press the On / Off button to turn off the device.
2. Fan speed
Select the desired fan speed by pressing the "Mode" button.
General Mode: In the presence of a large number of people, it is recommended to select the highest
fan speed.
Quiet mode: low fan speed. It is the one suggested.
High Efficiency mode: it is the recommended choice when there is a high presence of dust, pollen or
with a large number of people inside the room.
3. Timer setting
It is possible to select the timer from 1 to 8 hours.
4. UV sterilization
Press the ON / OFF key to turn on the display, press the Disinfect key to start UV sterilization.
(Note: The UV sterilization function is optional, it depends on the model).
5