Cleaning And Maintenance; Troubleshooting - Mach Power HC-SWAP50 Manual Del Usuario

5. CLEANING AND MAINTENANCE

1. Disconnect the power supply before cleaning the filter.
2. Clean the camera body: use a soft and dry cloth to clean from surface dust and stains. (Note: in case
of excessive dirt use a damp cloth and wipe gently, do not use abrasive substances.)
3. Clean the vents: use a soft brush to remove dust from the vents.

6. TROUBLESHOOTING

The device is not working properly:
Check the power supply and turn the device back on.
No air comes out of the device:
Check the power supply and turn the device back on.
The device has been in operation for a long time, but the air quality has not improved:
It is possible that inside the room there is a high presence of dust or pollen. If you need to increase
the fan power and leave it running for longer.
The device is making strange noises:
Make sure all packaging has been removed.
Make sure that the air vents are not obstructed by objects. Remove any obstacles.
If noises are still present, contact the technical service.
6