Proper Use - LED2WORK CENALED LENS AC Flexarm Manual De Instrucciones

BA CENALED LENS AC Flexarm
Contents
1 | Proper use
2 | For safe operation
3 | Safety information
4 | Assembly/mounting
5 | Connection
6 | Maintenance and Care
7 | Warranty
8 | Disposal
9 | Customer service
10 | Technical data
Particulars according to the Regulation ErP 2019/2020/EU
| Structure of safety and supplementary information
Important instructions are marked with signal words or symbols in this operating manual. Some signal words denote
the degree of the potential risk of injury. Colours and the different shades of grey and triangular symbols visually
underline the degree of danger.

1 | Proper use

The luminaire is used for illumination. A continuous operation is admissible. For connection values, see luminaire label
and/or "Technical data". The power connection is made via the SCHUKO plug and cable at a 220-240V AC connection.
ENGLISH
Indicates an imminently hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
could result in minor or slight injury.
Indicates a potentially hazardous situation which, if not avoided,
could result in property damage.
Gives you additional information for the safe and efficient use of the product.
Refers to compliance with these operating instructions.
CE marking: confirms conformity with applicable standards and regulations.
The safety information and all other information in this manual must be followed. Read
the entire operating manual carefully before mounting and turning on.
www.led2work.com | shop.led2work.com
7
8
8
8
9
9
9
9
10
10
23
| 7