Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
Simple On / Off operation using Foot Switch
The heater can be simply operated using the foot switch.
ECODESIGN Notice:
When used in this simple operating mode, the Select under desk heater should only be used in well insulated
spaces for occasional use and should not be left operating permanently switched on.
Operation
To use the heater with the foot switch:
Pull the thermostat (8) gently out from the bottom of the SMART-R box until it stops.
Switch the mains socket ON.
Switch the Power Switch (9) on ('I' position on rocker switch).
Click the foot switch until the Power Switch (9) illuminates RED.
The heater will warm up until it senses the local temperature of 37°C is reached at which point it will switch off.
You can lower the set temperature using the – button on the side of the SMART-R receiver. You can only raise the
temperature (using the + button) to 37 °C.
You can switch the heater off and back on immediately using the foot switch.
Heater control using the Smartlife App
The Select under desk heater can be more comprehensively controlled using the SmartLife App. This allows you to
set a heating schedule including an AWAY (Holiday) mode and enables voice control via Alexa or Google Assistant.
You can still also operate the foot switch to turn the heater off and on.
ECODESIGN Notice:
When used with the SmartLife App, the Select Under Desk Heater is fully ECODESIGN compliant and can be
permanently set up and left switched on.
Downloading & Installing the Smartlife App
Scan the QR code below to download the Smartlife App from the App Store or Google Play.
Alternatively, search "Smart Life" on Google Play or the App Store & look for this icon.
After installing and opening the Smartlife App, you must register an account using an email address and password
and accept the terms of use.
Before starting pairing, please ensure:
- Your mobile phone is connected to the 2.4GHz wifi signal from your router. Some routers also issue a 5GHz
signal, so be sure to select the 2.4GHz option.
- Switch off "Wifi Assist" (IoS phones). You can switch it back on after pairing.
- Be sure to be connected to your main router and ensure your heater is within range of your router.
Select under desk heater
ENGLISH
Publicidad
