Operating Instructions - Midea MDRF632FG Serie Manual De Usuario

2.7 OPERATING INSTRUCTIONS

Display
•
The first time the power is turned on, the complete display will light
up for 3 seconds. The starting beep sounds and the screen enters
normal operation. First time using the refrigerator, temperatures of the
refrigerating and freezing chambers should be set to 5°C and -18°C
respectively.
•
In case of error, the display shows the error code in the refrigerating
temperature display area (see next page); during normal operation, the
display shows the set temperature of the cooling compartment.
•
Under normal circumstances, if there is no any manual operation of the
refrigerator for 30 seconds, the control panel will lock automatically,
and in locked state, the display light will go out after 30 seconds.
Lock /unlock
•
In unlocked state, press and hold the lock button
enter the lock state.
•
The logo goes out and the buzzer sounds to confirm that the display
panel is locked, all buttons are locked.
•
In locked state, press and hold the lock button
enter the unlocked state.
•
The logo lights up and the buzzer sounds to confirm that the display
panel is unlocked, all buttons are working again.
Temperature setting of refrigerating chamber
•
Press the temperature zone selection button
setting temperature zone of the refrigerating chamber, then press
button or
chamber. The temperature setting range for the refrigerating chamber
is 2°C to 8°C.
Temperature setting of freezing chamber
•
Press the temperature zone selection button
setting temperature zone of the freezing chamber, then press button
or to adjust the setting temperature of the freezing chamber. The
temperature setting range for the freezing chamber is -24°C to -16°C.
to adjust the setting temperature of the refrigerating
EN-16
for 3 seconds to
for 3 seconds to
to choose the
to choose the