Main Screen - G-Systems GSE Light timer Manual Del Usuario

On the main screen you can see the two channels by row A+B,
Temperature sensor and their value and the fan speed in %.
Push the arrow DOWN and you can see the day counter. This counter
counts every 24h+1 day. You can adjust this in the settings.
Push the arrow UP and you can see the current date and time.
Push ENTER to go to the settings menu.
1.0 Config channel
2.0 General settings
The current position is blinking, choose UP or DOWN arrows to
navigate through the settings.
Push ENTER to choose.
Repeat UP or DOWN arrows to navigate through the settings.
Choose a channel you want to set up and confirm with ENTER.
EN
1 Config Channel sub menu settings:
1.1 ON time
1.2 OFF Time
1.3 Set dimming temperature from - to in
1.4 Set dimming range in %
1.5 Shutdown temperature
1.6 Restart temperature
1.7 Cool down time for MH/HPS lamps
1.8 Sunrise time
1.9 Sunset time
1.10 Day counter
Push ENTER to change the settings. Now the hh: hours starts to blink.
Adjust the ON hours with the UP/DOWN buttons, push SAVE/EXIT to save
and return, or ENTER to go to the :mm minutes settings. Adjust the ON
minutes with the UP/DOWN buttons, push SAVE/EXIT to save and to return
to the sub menu.
Repeat the settings in the same way to set the light OFF time.
18
GSE Light timer

Main screen

Menu settings:
Light On time
Light Off time