Publicidad
Idiomas disponibles
Idiomas disponibles
A
U
T
O
Press any button to deactivate the alarm.
Return the function knob and thermostat knob to
to
and
, then press the time button for at least 2
seconds to switch off the oven.
SETTING THE TIMER
This option does not interrupt or activate cooking but
allows you to use the display as a timer, both while a
function is active and when the oven is off.
To activate the timer, long press the time button: the
symbol flashes on the display.
A
U
T
O
Use the
and
buttons to set the desired duration:
the countdown begins after a few seconds.
A
U
T
O
The display shows the time of the day and the
remains lit, confirmating the timer has been set.
Please note: To view the countdown and change it if
necessary, press the time button 2 seconds again.
4
• COOKTOP OPERATION
(see the instructions supplied with the cooktop)
Turn the control knob of the relevant hotplate
clockwise to the desired power setting.
The oven control panel features 4 adjustable knobs
for cooktop operation. The cooktop control knobs
are marked with a numerical scale corresponding
to different power settings, and a series of function
symbols.
GENTLE HEAT
To allow dough to rise, to soften butter taken from
the fridge, to keep baby bottles or food warm, also for
making yoghurt, melting chocolate, etc. This function
is only available when the residual heat indicator
is on. For this function, make sure the residual heat
indicator of the desired hotplate is on. Turn the knob
to
. To deselect the function, change the position
of the knob.
HEAT MAINTENANCE
To maintain a constant temperature of 60° until the
end of cooking. To select this function, turn the knob
to
.
FAST BOIL
This function is used to bring water to the boil
rapidly and remains on for a preset time. At the
end of the preset time, the cooktop automatically
returns to the maximum power setting. This function
can be selected even during cooking. Important:
before selecting this function, make sure the pot
is positioned on the selected hotplate in order
to avoid any damage to the cooktop surface. The
stated performance values for this function are those
guaranteed for all glass ceramic cooktops. For this
function, place the pot on the selected hotplate and
turn the knob to
. To deselect, change the position
of the knob.
MULTIZONE
This is available on the front left and rear left
hotplates. This extends the heating area of the
cooktop in order to allow the use of large, oval or
rectangular pots or cooking receptacles. To select
this function: turn the knob to
the residual heat indicator for the hotplate begins
to flash. To switch on the triple zone function (if
available), wait until the LED begins flashing quickly.
Select the power setting required by turning the knob
anticlockwise. The residual heat indicator remains on
to indicate that the cooktop is in use. To deselect, turn
the knob to by turning the knob anticlockwise.
Please note: The multizone function can only be switched on
for the double and triple hotplates of the cooktop.
and wait until
Publicidad
