Technical Specification - HYGIPLAS F306 Manual De Instrucciones

Technical Specification

Measurement range
Accuracy
Display resolution
Sampling rate
Temperature
response
Automatic shut off
Battery
Ambient temperature
Battery Life
Unit dimension
Compliance
Dispose of depleted batteries in accordance with local regulations, within
the EC there are nominated disposal points for batteries.
The WEEE logo on this product or its documentation
indicates that the product must not be disposed of as
household waste. To help prevent possible harm to
human health and/or the environment, the product must
be disposed of in an approved and environmentally safe
recycling process. For further information on how to dispose
of this product correctly, contact the product supplier, or the
local authority responsible for waste disposal in your area.
HYGIPLAS parts have undergone strict product testing in
order to comply with regulatory standards and specifications
set by international, independent, and federal authorities. HYGIPLAS
products have been approved to carry the following symbol:
KEEP OUT OF REACH OF CHILDREN
Swallowing can lead to chemical burns,
perforation of soft tissue, and death.
Severe burns can occur within 2 hours of
ingestion. Seek medical attention immediately.
All rights reserved. No part of these instructions may be produced or transmitted in any form or by
any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written
Every effort is made to ensure all details are correct at the time of going to press, however,
HYGIPLAS reserve the right to change specifications without notice.
-50 to 200°C /-58 to 392°F
±1°C between -20 to 120°C otherwise ±2°C
±2°F between -4 to 248°F otherwise ±4°F
0�1°
1 second
Within 8 seconds from 25°C /77°F raised
to 100°C /212°F
After idle for 10 minutes
3 volt, size CR2032 or equivalent, 1 piece
0 to 50°C /32 to 122°F
Continuous operation 5000 hours
62 (W) X 28 (H) X 165 (L) mm
WARNING
permission of HYGIPLAS.
EN
3