VALBERG WF 1014 A W180C3 Instrucciones De Uso página 31

B
Reloading during a cycle
If you want to load additional clothing during a wash cycle, press the "Start/Pause" button.
and the Door Lock icon will flash. When the Door Lock Icon disappears, the door can be opened.
50°C or that it is too late to load more clothing into the machine because the latter will not
get washed.
Program information
1. The ECO 40-60 program is suitable for washing normally soiled cotton laundry, that is
washable at 40°C or 60°C, in the same cycle. This is the program used to assess compliance
with European eco-design regulations.
2. Power consumption is 0.49 W in off mode, and 0.49 W in standby mode.
3. The most energy-efficient programs are usually the ones that work at lower temperatures
for longer periods of time.
4. Loading the household washing machine in accordance with the maximum capacity
recommended by the manufacturer for the program in question helps to save energy and water.
5. Correct use of the washing product, fabric softener and other additives. Do not use an
excessive amount of washing product. This could adversely affect washing performance.
6. Periodic cleaning (including optimal frequency), procedure and limescale prevention.
7. The noise level and residual humidity depend on the spin speed: the higher the speed
during the spin phase, the louder the noise level and the lower the residual humidity level.
8. The product information and the QR code can be found on the energy consumption label.
Product registration information can be obtained by scanning the QR code.
9. Information about standard programs:
Using the appliance
is lit, the door can be opened during the cycle, and the time remaining
does not flash, it means that the current temperature is above
28
26
EN