Troubleshooting Guide - VALBERG WF 1014 A W180C3 Instrucciones De Uso

C
Useful information

Troubleshooting guide

.
Thanks to these features, the system can detect problems in time and trigger the appropriate
safety measures. In many cases, these problems are so minor that they can be resolved in
a matter of minutes.
The washing machine does not start and none of the indicator lights are on. Check that:
.
.
The washing machine does not start... and the "Start/Pause" indicator light is flashing.
Check that:
.
.
. Open the water tap and press the "Start/Pause"
button.
The appliance stops during the cycle (depends on the model). Check that:
. Deactivate this option by pressing the "Start/Pause"
button or by selecting and starting the "Drain" program.
. Reselect
the program of your choice, then press the "Start/Pause" button.
. Close the door and
press the "Start/Pause" button again.
. Otherwise, start the anti-foaming program.
The appliance will operate in automatic mode after a pause.
.
At the end of the wash cycle, some washing product residue remains inside the dispenser
drawer. Check that:
correctly fitted in the dispenser drawer and all the parts are clean (see "Care and maintenance"
section).
. The screen filters in the water supply
system may be blocked (see the Care and maintenance section);
38 EN
6