To Adjust The Seat - Husqvarna TS 354XD Manual De Usuario

Seat, 1 pcs
To install the seat
1. Fold the seat pan forward.
2. Install the 2 bumpers (A) to the seat pan (B) with
the 2 bolts (C).
A
3. Hold the seat (D) in position and install 1 of the 2
seat adjustment knobs (E) in 1 of the adjustment
holes (F) in the seat pan.
D
F
E
G
H
4. Install the other seat adjustment knob (G).
5. Install the 2 bolts (H) in the slots in the seat pan.
6. Adjust the seat before you operate the product.
To adjust the seat on page 11 .
Refer to
1940 - 006 - 13.09.2022

To adjust the seat

1. Fold the seat forward and remove the seat
C
B
2. Loosen the seat adjustment knob (B).
3. Move the seat until it is in a position where you
4. Align one of the holes in the seat pan with the
5. Tighten the 2 seat adjustment knobs fully.
To adjust the seat height
The seat height can be adjusted into 2 positions,
upper position and lower position. The seat is
installed in the upper position from the factory.
1. Fold the seat forward.
2. Remove the 2 bolts (A) and the 2 nuts (B).
adjustment knob (A).
A
can push the brake and clutch pedals down.
hole in the seat and install the seat adjustment
knob (A).
A
B
A
WARNING:
pan comes loose when you remove
the bolts and the nuts.
B
C
D
The seat and seat
11