Led Wiring Configuration - Kicker KMXL65 Manual Del Propietário

LED Wiring Configuration

When hard-wiring the LED lighting, the black lead is
+12V and the blue, red and green leads are ground.
1. Connect the black LED wire to the positive terminal
of the battery.
a. Place a 2-amp fuse (not included) no further than
7" away from the battery terminal.
b. Install a switch (not included) on the black LED
wire between the fuse and the speaker, so the LED's
can be turned off. Without a switch to turn them off,
they will always be on.
2. Connect the red, blue and/or green LED wires to
the negative terminal of the battery. See the chart
below for available combinations.
+12V
Color Combinations: Splice and combine the ground wires to yield a different color.
Wires Connected to Negative Terminal
Red
Green
Blue
Red/Green
Red/Blue
Blue/Green
Red/Green/Blue
English
Switch
2A fuse
(max)
Ground
LED Color
Red
Green
Blue
Lime Green
Magenta
Aquamarine
Blue-White
≤7"
(17.5cm)
12V
battery
6