Stand Mounting - Cameo S4 IP Manual De Usuario

STAND MOUNTING

HAZARD: Overhead mounting requires extensive experience, including the
calculation of the load limit values of the installation material and regular safety
inspection of all installation materials and spotlights. If you do not have these
qualifications, do not attempt to perform an installation yourself. Refer instead to a
qualified professional.
secured may come loose and fall down. This can cause serious injury or death.
Use the 28 mm TV spigot previously mounted on the U-bracket to mount the stand
(Fig. A). Use a suitable stand and observe the manufacturer's instructions (maximum load
capacity, vertical installation on a level surface, etc.). To adjust the dispersion direction in the
vertical plane, slightly loosen the clamps mounted on the U-bracket (Fig. B), adjust the desired
beam direction and tighten the clamps again.
B
There is a risk that devices that are incorrectly mounted and
A
- Similar to image -
B
33