Power On And Off; Touch Controls - Urbanista AUSTIN Manual Del Usuario

U S E R M A N U A L
URBANISTA AUSTIN
Thank you for purchasing an Urbanista product.

POWER ON AND OFF

The earphones automatically power
on and off as you open and close the
charging case lid. Five minutes of
disconnect will automatically power
off. If your earphones are automatically
powered off outside the charging case,
you can press the left and right sides
separately for 5 seconds to power
them on.
FIRST-T IME PAIR ING AND
R ECONNEC TIN G
Open the charging case lid to initiate
first-time pairing. Go to the Bluetooth
settings on your device and select
"Urbanista Austin" to connect. The
LED will turn off as the earphones
successfully connect. The earphones will
automatically try to reconnect to the last
connected device every time they are
powered on.
CONNECT TO ANOTHER D EVIC E
Disconnect the earphones from your
device to enter pairing mode again.

TOUCH CONTROLS

Use the double- and triple-tap
commands to control music and calls.
• Play/Pause:
Double-tap left or right side
• Previous song:
Triple-tap left side
2
• Next song:
Triple-tap right side
• Answer/Hang-up:
Double-tap left or right side
• ¨Reject a call:
Long-press left or right side
• Activate Voice assistant:
Long-press left side
RE S E T
Should the earphones fail to connect, be
unstable or unresponsive, please follow
the below steps:
• Put the earphones back in the
charging case and close the lid.
Reopen after 10 seconds to pair or
reconnect to your device.
Should the problem persist, please follow
the below steps for a full reset:
1. Remove "Urbanista Austin" from the
Bluetooth list on your device
2. Take out the earbuds from the
charging case
3. Tap the earbuds 7 times, and the
earbuds' LED will flash 3 times and
turn off automatically. The earbuds
are reset successfully.
4. Turn on the earbuds and they are
ready to connect with your bluetooth
device.
Tips: If the earbuds are paired, tapping
only one of the earbuds 7 times can reset
both of them.
( E N G )