To Adjust The Shoulder Harness; To Assemble The Shoulder Harness; Operation; Before You Operate The Product - Husqvarna 135R Manual De Usuario

8. Install the trimmer head/plastic blades (H)
counterclockwise.
H
9. To disassemble the trimmer head/plastic blades,
follow the instructions in the opposite sequence.

To assemble the shoulder harness

1. Put the ring of the shoulder harness strap through
the hook (A) and attach it with the bolt.
Introduction
WARNING:
product, you must read and understand the
safety chapter.

Before you operate the product

• Examine the work area to make sure that you know
the type of terrain, the slope of the ground and if
there are obstacles such as stones, branches and
ditches.
• Do an overhaul inspection of the product.
• Do the safety inspections, maintenance and
servicing that are given in this manual.
• Make sure that all covers, guards, handles and the
cutting equipment are correctly attached and not
damaged.
• Make sure that there are no cracks at the bottom of
the grass blade teeth or by the center hole of the
blade. Replace the blade if it is damaged.
975 - 005 - 14.11.2022
H

Operation

Before you operate the
2. Attach the hook (B) of the shoulder strap to the ring
(C) on the frame.
A

To adjust the shoulder harness

1. Stop the engine.
2. Put on the harness.
3. Adjust the shoulder strap to make the product weigh
equally on your shoulders.
• Examine the support flange for cracks. Replace the
support flange if it is damaged.
• Make sure that the locknut can not be removed by
hand. If you can remove it by hand, it does not
lock the cutting attachment sufficiently and you must
replace it.
C
B
13