Publicidad
Idiomas disponibles
Idiomas disponibles
Drawing 5:
Bracket has been prepared to be
fixed on a wall. Chose the whole
you need to fix them according to
drawing.
Firmly tighten the bolts with a 17mm wrench: it is best to use a wrench with a closed end rather
than an open end because this will avoid damage to the nut if it should slip.
As soon as they are fully inserted, the brackets must sit firmly in the wall. If they are still moving in
any form, you must further tighten it. Ensure that the wall brackets are screwed firmly to the wall, so
that they can in no case tear out when the awning is installed.
Do not try to secure the wall brackets to loose wall stones or any surfaces that are not absolutely
firm.
Step 6: Install awning
After all three brackets have been mounted properly you can fix the awning. At least three ladders are
required to install the awning in order to obtain the required height. Ensure that the ladders are firmly resting
on the ground so that you cannot fall. Only use ladders that are suitable for such assembly work.
Insert the awning into brackets as shown in drawing below. Then immediately insert the safety screw and fix
it with lock nut. Attachment brackets for wall and ceiling installation:
19
Drawing 6:
Insert awning to bracket as
shown. Fix the awning with
delivered safety screw and lock
nut and tighten it properly.
Publicidad
