Error Codes; Parts Information; Replacement Parts - OHAUS Sapphire JS10 Manual De Instrucciones

EN-10

Error Codes

Err 0 Invalid checksum data. The balance may need recalibration, particu-
larly linearity calibration. If the error persists after recalibration, the
balance must be serviced.
Err 1 Sample being weighed exceeds the capacity of the balance. If error
occurs when the sample is within the balance capacity, balance may
be incorrectly calibrated. An underload such as the pan off of the
balance could also display Err1. Recalibrate the balance.
Err 4 Incorrect or no calibration mass used when performing calibration
procedure. Error will flash momentarily, then balance will use previous
calibration data. Recalibrate correctly.
Err 9 Internal data error. Return balance for servicing.

PARTS INFORMATION

If you require replacement parts or would like to purchase accessories, please
call Ohaus Corporation toll-free at (800) 526-0659. An Ohaus Product Parts
Specialist will be available to help you.

REPLACEMENT PARTS

AC Adapters:
100/120 Vac US Plug
220 V ac Euro Plug
240 V ac UK Plug
240 V ac Austrailan Plug
Pan for JS10 3.0" (7.6cm) dia.
Pan for JS500, 5 x 5.75" (12.7cm x 14.6 cm)
Weigh Below Hook
Scoop
2 Text new.pmd 10
Sapphire JS10 and JS500
Part NO.
90524-66
90524-63
90524-64
90524-65
80250658
71131295
5227-04
71147059
6/10/2004, 9:53 AM