Publicidad
Idiomas disponibles
Idiomas disponibles
carried out by an authorised customer services agent for Maxpro power tools.
ENVIRONMENT
Do not dispose of electric tools, accessories and packaging together with household waste material
- in observance of European Directive 2002/96/EC on waste of electric and electronic equipment and its
implementation in accordance with national law, electric tools that have reached the end of their life must
be collected separately and returned to an environmentally compatible recycling facility.
TROUBLE SHOOTING
Fault Symptom
Possible Cause
Out of service
Disconnection between plug and
power socket
shortcircuit in power supply
At switch-off
Loose switching contact
Burnout of stator or rotor coil
Wearout of carbon brush
Stator wiring disconnection
Disconnection between carbon
brush and commutator
Sluggish start-up, falling short of
Unsmooth running in mechanical
running speed
part
Low supply voltage
Burnout of switch contact
Excessive sparkling during running Underpressure in carbon brush
spring
Excessive wearout of carbon brush Replace carbon brush by reparier
Overvoltage in supply power
Disconnection between carbon
brush and commutator
Ring fire caused by shortcircuit in
rotor winding shortcircuit
Ring fire caused by shortcircuit in
commutator segment
Failed to reach rated power
Electrocircuit overload due to
lighting device, public utility or
other electric appliances
Machine superheating
Electromotor overload
Excessive blunt drilling bit
Insufficient lubricating oil or greasy
lubricating oil in reduction gearbox
Insufficient motor cooling
Gear shifting failure
Shifting fork or bearing damaged
Failure of mechanical shock
Air cylinder or teleflex damaged
motion
Wearout of O-shape coil
Piston fracture or insufficient
lubricating oil
6
Troubleshooting
Put plug in power socket
Repair and reconnection
Switch on
Replace switchboard by repairer
Replace stator or rotor by repairer
Replace carbon brush by repairer
Reconnection by repairer
Replace carbon brush
Check mechanical part by repairer
Regulate supply voltage
Replace switchboard by repairer
Replace carbon brush by reparier
Regulate supply voltage
Replace carbon brush
Check or replace rotor by repairer
Check or replace rotor by repairer
No use of public utility or other
electric appliances on machine-
connected electrocircuit
Overload protection
Replace drilling bit
Replenish or replace lubricating oil
by repairer
Dedust air outlet
Check and replace shifting fork or
bearing by repairer
Check and replace air cylinder or
teleflex by repairer
Replace O-shape coil by repairer
Replace piston or replenish
lubricating oil by repairer
GB
Chock liner gets stuck
Disconnected running of spline
shaft or swinging bearing by
repairer
Piston connecting rod fracture
No motion of drilling bit
Rotor tooth fracture
during motor running
Gear wheel fracture
Clutch gear slippage
Repair chock liner by repairer
Replace spine shaft or swinging
bearing by repairer
Replace piston connecting rod by
repairer
Replace rotor by repairer
Replace gear wheel by repairer
Replace clutch gear by repairer
GB
7
Publicidad
