Publicidad
Idiomas disponibles
Idiomas disponibles
1 - PRESENTATION
The H02/22 SE heater fireplace has the following main
features:
Front and doors made of cast iron and a 4 mm
thick sheet steel boiler.
Capacity of the boiler: 50 liter.
Two 1 - ½" G boiler connection sleeves.
One ¾"G boiler connection sleeve.
Nominal power of 13 kW (6,4 kW power transfe-
rred to water and 9 kW power transferred to the
environment).
Combustion chamber lined with vermiculite.
They are designed for use with firewood only.
Combustion air inlet regulation valve.
Removable ashtray.
Option to connect an outside air inlet (inlet not
supplied).
Fully factory assembled, ready for connection to
the chimney and hydraulic installation.
2 - INSTALATION
IMPORTANT! All local regulations, including those
that refer to national or European regulations, must
be applied when installing this device.
The way the H02/22 SE fireplace is installed will decisi-
vely affect safety issues and its correct operation.
It is important to install the fireplace correctly.
For the correct installation of the H02/22 SE and
chimney, we recommend the installation be perfor-
med by a professional.
When, in the same room, the device is going to be
operating together with other heating devices that
require air for their combustion process, we recom-
mend planning an intake of additional exterior air to
facilitate the combustion of the said devices.
The use of one or more heating devices in the same
room reduces the level of oxygen which affects com-
bustion and reduces chimney draw.
In order to prevent the overheating of the hood li-
ning panels, we recommend lining the said walls in-
ternally with an insulating material, such as rock
wool or a similar product.
20
Publicidad
