Torque Specifications; Fit - Serial 1 CTY Manual Del Propietário

Screw the pieces together,
o
tightening using multi-tool

Torque Specifications

Always tighten fasteners to the correct
torque to ensure the integrity of the
eBicycle. In case of a conflict between this
manual and information provided by a
component manufacturer, consult with
Serial 1 or the component's customer
service representatives for clarification.
14
Table 3: Torque Values
Tool
Part Torque
Size
4mm
Tighten bottom two,
Handlebar 6 Nm
⬡
then top two screws
Handlebar 4mm If necessary, for
6 Nm
⬡
stem service
5mm
Saddle rail If necessary, for
9 Nm
⬡
clamp service
Seatpost 4mm Set the height, then
6 Nm
⬡
clamp
Align brake disc
Axles
6mm rotor between brake
11 Nm
⬡
pads before
(wheels)
inserting axle

FIT

Verify your eBicycle is the correct size.
Notes
Correct fit is essential for a safe and
pleasant ride.
Standover Height
Standover height is the basic element of
eBicycle fit. It is the distance from the
ground to the middle of the top tube.
Step-Over Frame
torque
When straddling the top tube of a Step-
Over style bike, you should have 1 – 2 in
[2.5 – 5 cm] of clearance between yourself
and the bike.
Step-Thru Frame
Standover height does not apply to
eBicycles with step-thru frames. Instead,
the limiting dimension is determined by
saddle height range.