Technical Specifications; Getting Started - Emos E06018 Manual De Instrucciones

GB | Wireless Sensor
Sensor Description
1 – opening for hanging on a wall; 2 – stand; 3 – TX button;
4 – switching sensor channel no. 1/2/3; 5 – battery compartment

Technical specifications:

outdoor temperature: -50 °C to +70 °C, increments of 0.1 °C
temperature measurement accuracy: ±1 °C for 20 °C to +24 °C
range, ±2 °C for 0 °C to +20 °C and 24 °C to +40 °C range,
±3 °C for -20 °C to 0 °C and 40 °C to +50 °C range, ±4 °C for
other ranges
outdoor humidity: 1–99 % RH, 1 % resolution
humidity measurement accuracy: 5 %
radio signal range: up to 100 m in open area
wireless sensor: transmission frequency 433 MHz, 10 mW e.r.p. max.
sensor power supply: 2× 1.5 V AAA (not included)
sensor dimensions and weight: 15 × 62 × 100 mm, 54 g

Getting Started

1. Connect the adapter to the station, then insert batteries first
into the weather station (3× 1.5 V AAA), then into the wireless
sensor (2× 1.5 V AAA). The battery compartment of the sensor
is protected by screws; use a suitable screwdriver.
2. When inserting the batteries make sure the polarity is correct
to avoid damaging the weather station or sensor. Only use
alkaline batteries of the same type; do not use rechargeable
batteries.
3. Place the two units next to each other. The weather station
will automatically detect the sensor signal within 3 minutes.
If signal from the sensor is not detected, long-press the
button on the weather station to repeat the search.
4. We recommend placing the sensor on the north side of the
house. The range of the sensor may decrease substantially
in areas with large number of obstacles.
5. The sensor is resistant to dripping water; however, it should
not be exposed to sustained rain.
3