1.
INTRODUCTION
WELCOME to Pride Mobility Products. The Fusione power chair you have
purchased combines state-of-the-art components with safety, comfort, and styling in
mind. We are confident that these design features will provide you with the conveniences
you expect during your daily activities. Once you understand how to safely operate and
care for your power chair, it should give you years of trouble-free operation and service.
Read and follow all instructions, warnings, and notes in this manual before attempting to
operate your power chair for the first time. You must also read all instructions, warnings,
and notes contained in any supplemental instructional booklets for the controller, front
riggings, and/or seating system that accompanied your power chair before initial
operation. Your safety depends upon you, as well as your provider, caretaker, or
healthcare professional in using good judgement.
If there is any information in this manual which you do not understand, or if you require
additional assistance for setup or operation, please contact your authorized Pride
Provider. Failure to follow the instructions in this manual and those located on your
power chair can lead to personal injury and/or damage to the power chair and may
void the warranty.
The Fusione power chair is classified as a category B vehicle under the European power
chair standard EN 12184. It is intended for the use of people of all ages who may have
difficulty walking distances or for periods of time. It is ideal for outdoor use and suitable for
users up to 150kg (330 lbs.) in weight. Differing user weights can cause performance
variation. The power chair is designed to be driven on footpaths and to crossroads.
Fusione has been manufactured to comply with the requirements of the Medical Device
Directive 93/42/EEC, and the Medical Device Regulation EU MDR 2017/745, the radio
interference requirements of EEC Directive 89/336/EEC and the battery charger
requirements of EEC Directive 73/23/EEC and 89/336/EEC. Electro-Magnetic fields, such
as those emitted by shop alarms may be disturbed by use of the power chair. The
function of the power chair may also be disturbed by Electro-Magnetic fields emitted by
shop alarms.
We are dedicated to providing products of exacting quality that conform fully and reliably
to the requirements of their intended use. The manufacturer is BS/EN ISO 9001
accredited, which is the internationally recognized standard for quality management
systems. This approval ensures we provide quality in all areas of our business from
development through to final delivery. Should you require any further assistance then
please contact your local Pride dealer.
Fusione
- 3 -