Pride Mobility FUSION e Manual Del Propietário página 9

Transporting
Your power chair can be disassembled for transportation (no tools needed):
1. Power off
2. Pull the black strip on the back, so that the latch heads protruding from the fixed
plate on both sides exit the fixing plate. Fold the seat down.(8-2)
8-2
3. Legrest can be removed if there is little room to move. Hold the upper part of
legrest (like picture 8-4), make the pin out of hole and lift legrest up.
4. Place the power chair into the trunk
TIP
To reassemble the power chair, please reverse the sequence above.
Important
When reassembling the power chair, remember to re-install the battery locking bar; failure
to do so may result in the batteries disengaging during use.
Always secure your power chair parts before transportation. Remember to engage the
drive unit by pushing the freewheel lever forwards to stop the power chair from moving.
Fusione
8-4
- 8 -