Gastrodomus PLN20 Uso Y Mantenimiento página 27

CHAPTER 4 OPERATION
Before beginning each cycle of work, ascertain that the machine is perfectly clean in particular
the surfaces of contact of the bowl, spiral and central guard, which must be treated with detergents
compatible with alimentary products.
Operation of the 3 speed with selector model machine
(Series PLN...M)
1 . POSITION THE GENERAL SWITCH "A" TO 1
2 . SET THE TIMER "B" TO MAUAL OR AUTOMATIC ACCORDING TO THE
DESIRED TYPE OF OPERATION
3 . ENGAGE THE START BUTTON "E"
4 . SET-UP THE OPERATING SPEED BY OPERATING THE SPEED CHANGER "C"
5 . IN THE CASE OF THE PROTECTION GRILL OPENING, THE MACHINE STOPS.
TO RESTART IT, CLOSE THE GRILL AND PRESS THE START BUTTON "E"
AGAIN
6 . TO STOP THE MACHINE, PRESS THE STOP OR WAIT UNTIL THE END
OF THE WORK CYCLE SET BY TIMER "B"
Operation of the machine model with continuous change
with manual c ommand (Series PLN...V)
1 . POSITION THE GENERAL SWITCH "A" TO 1
2 . SET THE TIMER "B" TO MAUAL OR AUTOMATIC ACCORDING TO THE
DESIRED TYPE OF OPERATION
3 . PRESS THE START BUTTON "E"
4 . OPERATING THE DIAL "C" DEFINES THE SPEED, FROM 3O TO 12O TURNS/MINUTE
5 . IN THE CASE OF THE PROTECTION GRILL OPENING, THE MACHINE STOPS.
TO RESTART, IT CLOSE THE GRILL AND PRESS THE START BUTTON "E"
AGAGN
6 . TO STOP THE MACHINE, PRESS THE STOP OR WAIT UNTIL THE END OF
THE WORK CYCLE SET BY TIMER "B".