Taurus Alpatec TROPICANO MICA 3D 1500 Instrucciones De Uso página 6

Downloaded by: pd-oliana on 11-08-2022 08:30 CEST
EN
(Original instructions)
MICA RADIATOR
TROPICANO MICA 3D 1500
TROPICANO MICA 3D 2000
DESCRIPTION
1. Top cover
2. Power selector/off control
3. Thermostat control
4. Mains cable storage compartment
5. Rear plastic panel
6. Wheel base
7. Wheels
USE AND CARE:
Fully unroll the appliance's power cable before
each use.
Do not use the appliance if the ON/OFF switch
does not work.
Do not use the appliance at an angle or turn it
over.
Do not tip the appliance over while it is in use
or connected to the mains.
Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
Store this appliance out of reach of children
and/or those with reduced physical, sensorial
or mental abilities or who are unfamiliar with
its use
Do not put the appliance away if it is still hot.
Do not store or transport the appliance if it is
still hot.
Keep the appliance in a dry, dust-free place,
out of direct sunlight.
Never leave the appliance unattended while
in use.
Never leave the appliance connected and
unattended if not in use. This also saves
energy and prolongs the life of the appliance.
Do not use the appliance to dry pets or
animals.
Do not use the appliance to dry garments of
any kind.
CAUTION: Do not fall asleep while using
this appliance, as there is risk you could be
harmed.
Turning the thermostat control to the minimum
setting does not guarantee that the appliance
is switched off completely.
FITTING THE WHEELS (FIG.1)
1. Carefully turn the radiator upside down.
2. Insert the screws in the centre of the round
hole on the wheel base and use a screwdriver
to tighten them securely.
3. Repeat this operation for all of the other
wheels.
4. Return the radiator to its upright position.
INSTRUCTIONS
BEFORE USE:
Make sure that all the product's packaging
material has been removed.
Certain parts of the appliance have been lightly
greased, consequently, the appliance may give
off a light smoke the first time it is used. After a
short time, this smoke will disappear.
To eliminate the smell given off by the
appliance when used for the first time, it is
recommended to have it on at full power for 2
hours in a well-ventilated room.
Prepare the appliance according to the function
you wish to use.
USE:
Unroll the cable completely before plugging it
in.
Connect the appliance to the mains.
Use the power selector to turn on the
appliance. (2)
The pilot light comes on.
Turn the thermostat control to the desired
temperature position. (3).