Publicidad
Idiomas disponibles
Idiomas disponibles
INTRODUCTION
EN
Thank you for the purchase of our quality product. Used carefully and in accordance with the instructions set
out below. Please read and keep these instructions for future reference.
PARTS
1. Aluminium Die-casting.
2. PC Lens.
3. Bolt.
FEATURES
Energy used: 50W.
Voltage: 185-265V~ 50/60Hz.
Lumens: 4700Lm.
.
Colour's temperature: 4000K // 6500K.
Life: 35.000H.
Dimension: 204.5x228x29mm.
Operating temperature: -20°C - +55°C.
Cable: H05RN-F3G // 1mm
Beam angle: 90º.
IP65
GENERAL INFORMATION
Do not mount ceiling/wall fittings onto damp sur-
face such as newly painted or plastered areas as
this may cause discolouration of the finish.
Tools which may be required:
- Drill.
- Cross head screwdriver.
- Small electrical slotted screwdriver.
- Insulation tape.
8 | www.garsaco.com
INSTALLATION
1. Fasten the adjustable bracket with stainless steel
1
screws.
2
3
4
5
4. Ventilation plug.
5. Cable H05RN-F3G.
(1mm
)
2
2. Connect the main line to the power wire of the
lamp.
.
2
Only use a round cable supplied to connect this fit-
ting (6mm diameter minimum). This required in order
to create a good water seal when connected to the
fitting.
Publicidad
