Publicidad
Idiomas disponibles
Idiomas disponibles
Battery fully charged
Battery 30% charged
Before start make sure the battery pack was put into the chain saw.
Switching on and off
WARNING！
Switch on: press the safety button (6) on the combined switch firstly and keep it
down until press the switch lever (7) at one time.
Switch off: release the switch lever (7).
Checking oil supply
After starting the engine, run the chain at medium speed and see if chain oil is
scattered off as shown in the figure.
GB
Battery 60% charged
No electricity
Fig.11
Fig.12
32
Publicidad
