How To Use The Test Light; General Training Tips - Dogtra Europe ARC 800 CAMO Manual De Instrucciones

Idiomas disponibles

10. HOW TO USE THE TEST LIGHT

1. Turn on the receiver/collar and place the test light over

the contact points as shown in the diagram.

2. The test light will illuminate momentarily when the Nick

stimulation button is pressed on the transmitter. The light

will stay lit as long as the Constant button is pressed on

the transmitter, up to 12 seconds.

3. When the stimulation is increased, the test light will emit

a brighter light.

Getting started with your ARC 800

Your dog must know some very basic obedience commands

before beginning training with the ARC 800. A dog learns

by first being shown a command, followed by lots of

repetition over an extended period. As the dog becomes

proficient at these commands, the trainer can introduce

distractions and different locations to strengthen them.

Throw in the correct amount of positive and negative

reinforcement and you should end up with a well-mannered

dog.

Obedience training on the leash

Your dog must fully understand the obedience commands

(sit, stay, here, heel and kennel) before using the e-collar

for reinforcement of these commands. A leash attached

to a standard collar is used to "teach" the dog the basic

obedience commands (here, heel, sit, and stay). A tug on the

leash/collar is used to reinforce the command. When the dog

complies with the command, use positive reinforcement/

praise. Once the dog understands these commands, the

e-collar can be used to reinforce them.

Beginning e-collar training

When you feel your dog understands the obedience

commands on the leash we can now start with the electric

collar training. With the dog on the leash wearing the

electric collar continue with your obedience drills.

Light stimulation (nick or constant) is going to be applied as

a command is given, the stimulation is removed as the

Tabla de Contenido