Geo-Fence; App Settings - Dogtra Europe PATHFINDER Manual De Utilización

GEO-FENCE

A Geo-fence can be created for a specified area and will be displayed on
the Map tab. The dog alerts for the Geo-fence are turned on by default and
a notification will appear when a dog exits or enters the Geo-fence. The
notification will blink the 'Collar Icon' and app screen, or on the home or lock
screen.
• The Geo-fence alerts can be turned on and off in the Settings.
Geo-fence Info
The info button displays more information on setting up the Geo-fence.
Saving a Geo-fence
Long press the map to create a Geo-fence point. The Geo-fence points must
be created in a clockwise order and cannot intersect. A valid Geo-fence will
be displayed in green, while an invalid Geo-fence will be displayed in red and
cannot be saved.
Once a valid Geo-fence is created, use the save button to save the Geo-fence
on the map. The Geo-fence points can be edited before saving by holding and
dragging the points to edit its location.
Multiplex Geo-fence
You can create up to 10 Geo-fences, but they cannot intersect or overlap each
other. The overlapped Geo-fences will be displayed in red.
You may create a name for each Geo-fence, which will be used for the fence
alarm as well.
Remove a Geo-fence
In the Geo-fence setup window, you may delete the Geo-fence by tapping the
center of the fence.
148

APP SETTINGS

Screen Saver
• The phone screen turns off when covered or in a pocket and turns on
when viewed.
• Turn this feature on and off using the On/Off button.
• On Android devices, the screen will turn off when the proximity sensor is
covered and turns on when the sensor is exposed.
Shake Control
• Shake your phone to jump between dogs or the main tabs.
• Select between tabs, dogs, and no action.
Volume Button Control
• Use the volume buttons to jump between dogs or zoom in/out on the map.
• Select between zoom, dogs, and no action.
Distance Unit
• The distance is displayed on the main tabs and device list.
• Select between meters and yards.
Speed Unit
• Select between seconds and hours.
GPS Data
• The GPS Data Limit sets how far back the tracks are displayed. If 2 minutes is
selected, only the tracks up to 2 minutes will be displayed.
• Select between intervals in 1 to 10 minutes or unlimited.
Tracking Only Mode
The PATHFINDER comes equipped with standard 15mm contact points that can
be replaced with the non-stimulation contacts to disable the e-collar hardware.
Set the app to Tracking Only Mode while using the non-stimulation contacts to
track only without training features.
• A new history file will begin recording when the Tracking Only Mode is turned on.
Offline Map Data Usage
Turn Offline Map Data on to use cellular data when available with Offline maps.
Turn Offline Map Data off to restrict data usage and only display downloaded
Offline Maps.
149